Publicado en 3C Tecnología. Special Issue – January 2019

Autores

• Veronica Manescu (Paltanea)
• Gheorghe Paltanea
• Dorina Popovici
• Gabriel Jiga

Resumen

Abstract

The magnetic properties of non-oriented silicon iron alloys are strongly influenced by the cutting technology. Medium quality electrical steel M800-65A samples were cut through mechanical punching, laser, water jet and electro erosion technologies and were characterized with an industrial Single Strip Tester at the peak magnetic polarizations Jp of 0.5, 1 and 1.5 T, in the frequency range starting from 10 Hz to 200 Hz. The influence of the cutting technology on the energy losses and magnetic permeability was investigated.

Artículo

Palabras clave

Non-oriented electrical alloys, Cutting technology, Energy losses, Relative magnetic permeability.

Keywords

Making self-help virtual reality exposure therapy accessible: hardware and design considerations

Articulos relacionados

• Automerlin mobile robot’s bilateral telecontrol with random delay
• Design and simulation of mems shunt capacitive switch for lower switching time
• Arduino based radar system
• Design and implementation of TCSC for 500KV power transmission system
• Efficient energy utilization in wireless sensor networks: an algorithm
• Simulative investigation of transmission performance for proposed NG-PON 2 based on DPQSK modulated downstream with two different intensity modulated upstreams
• A review on antecedents of citizen’s trust in government social media services
• An optimized hybrid beamforming for millimeter wave musassive MIMO system
• Effecting factors of knowledge integration through social media in small medium enterprises environment
• Analyzing site suitability for solid waste disposal through GIS multi-criteria decision making hierarchy process